|
The connectors are nice and
reasonably priced, but you really need the tool do this this right. If you
plan on adding several connectors, I would go ahead and drop the money on
the tool.
If you clip off the the
wire retaining flaps, as seen above on this pin, you could just solder your
wire in the open channel and not worry about a crimper tool at all. I should
have just done this instead of the pliers route.
As an alternative if you just
need a connector set and don't want another tool or want to mess with
crimping and what not, the PCI Express Extention Cable - 12 Inches -
Sleeved, with lock will work fine and are small
enough to fit through the Harley Tour Pak wiring hole which is predrilled from the
factory. They are 6 pin so there will be a left over wire to secure, no
biggie, I just need 5 connection points. I will cut the harness in half, solder these
connectors in line with the harness I ran from under the seat and I will
leave as much of the yellow, brown and black wire on these connectors so I won't
accidentally break the Radiantz wires if and when I need to disconnect the
trunk lights, i.e.., trunk removal. These are actually fairly
small connectors and have a plastic latch to keep them together. They are
available from just about any Company who deals with PC power supplies.
Performance PC's
Performance PC's - vendor
PCI Express Extention
Cable - 12 Inches - Sleeved Model: PCIXPRESS-EXT12 $12.50
|
|
Specifications:
Cable is 12 inches long Cable is fully covered in nylon
Techflex sleeving and premium heatshrink, colors of your choice!
|
Performance PC's - vendor
4 pin power connector for
Hard Drives and CDRW. $3.95 PN#MOLEXT12
|
Product Details:Extends a standard 5.25 Molex cable by 12" . 4-Pin
Female Molex to 4-Pin Male Molex. Cable is fully covered in nylon...
|
Even more options, and
the most cost effective are these from
DEL CITY.
The pricing on their crimping
tool(s) is steep.
|
