|
Click on pictures to enlarge
SCHEMATIC FOR DUAL
HEADLIGHTS
|
Electronic
Flasher, 3 Terminal Alternating Lights
These
Original Equipment replacement flashers
feature integrated circuit controlled
reliability and most have built-in lamp
outage indicators. Nearly all modern
cars and light trucks now come equipped
with Electronic flashers.
12 Volt
Alternating Flasher
Bracket or Socket
Mountable
Precise Square
Wave I.C. Controller
High Temperature
Plastic Enclosure
Standard 3
Terminal I.S.O. Pin-out
Solid State Relay
Driver Technology
Highest O.E.M.
Quality Printed Circuit Board Materials
Quality and
Durability Equal to O.E.M. Products
EMERGENCY VEHICLE FLASHER APPLICATIONS:
Light Bars,
Running Lights, Grill Lights
6 Lamps Per Side,
Maximum of 150 Watts Per Side
(Note on the relay it states 160w/side)
All Vehicle
Alternating Lights Controlled by One
Flasher
Design Life: 500 Hours Average
Market Price $15.99 USD
This is pretty straight forward, you run +12v in
it and with a separate lights on the 2
outputs, they alternate at around 90
flashes per minute. My +12v comes from
one of the 3 leads from the left mount
handlebar switch. Flip it on and bingo,
wig-wag.
As a
precaution, I added diodes as shown to
the left, Honestly since I ran them the
relay to my 75w driving flood light and
not the dual headlight, I probably could
have skipped the diodes. When I
flick on the driving floods in general,
it over rides the wig-wag if it is
engaged.
VIDEO OF THE WIGWAG
|
